DLP 3D Printing
The Perfactory® system works like a copy station. It builds solid 3D objects by using the DLP® projector to project voxel data into liquid resin, which then causes the resin to cure from liquid to solid. Each voxel dataset made up of tiny voxels (volumetric pixels), with dimensions as small as 16μm x 16 μm x 15 μm in X, Y and Z direction. It’s like building your part from very small building blocks with different volumes. With the Perfactory® system you can choose the balance between feature resolution and build speed. Dynamic voxel thickness gives you control over Z build thicknesses from 15 µm to 150 µm and the projector optics give you control over X and Y resolution from 16 µm to 69 µm.